Our Red Eazyrizer works with all smaller bikes right up to and including the 1000cc plus Sportsbikes like Honda Fireblade, Suzuki GSXR, Yamaha R1,R6,R7 Triumph Street Triple and all other similar bikes. Big Blue Professional does them ALL!

From 125cc machines right up to and including Harley Davidson's,  Triumph Rocket 3, Honda Goldwing GL1800, BMW K1600 and now the giant Can Am Spyder range including the RT and F3 range.

For Wheels Free lifting in total Safety the main 2 type of mounts are : Beam mount set, these are used for All Harley Davidson motorcycles and any other type of machine that has a Twin Rail (Duplex) frame or flat engine underside. They are fully adjustable so can be positioned anywhere along the lifting beam to suit your needs.

Footpeg mount set, despite the name the pegs are Not used for lifting as the vehicle weight is taken under the (Solid) pivot point close to the frame of the bike with the peg solely being employed to lock the bike securely to the lift with the U bolts provided.

There are 2 variations of these mounts first the Standard set that takes pegs up to 37mm wide then we have the Heavy Duty set for the larger Footpeg up to 60mm wide, more often used with older classic machines.

Lastly we have a range of "Special" dedicated mounts for some bikes and these can be viewed in our Mounts Gallery. Mounts can also be used on a Mix and Match basis.

Both the Big Blue and Eazyrizer Red will lift your bike between 75 & 85 cm to the bottom of the Frame rails or Engine, this will depend on the type of mounts employed as they vary in height with some mounts being adjustable but generally speaking the bottom of the motorcycle will be around waist height and will give you full 360deg of access to the machine for any type of work needing to be undertaken.

Both lifts can also be stopped at any point you desire for sitting down while detailing and when at full height a padlock can be inserted to prevent the lift from being lowered, plus the lift will stay in the position you leave it indefinitely!

A Fantastic Security System for your Motorcycle, Just Lift it and LOCK IT !!

We do not fit castors on our lifts like some of the lightweight sport bike lifts available today. We view this to be dangerous practice when heavy weights are being moved about especially on uneven surfaces! Our lifts have been designed so they can be easily rotated through 360deg due to their large flat footprint (Base) having no pressure points therefore enabling easy rotation.

Both lifts come Pre Assembled & Flat packed so can be easily assembled in minutes, even when assembled they will fit into the boot of most motors and can easily be picked up by a single person, the Big Blue weighing in at around 36kg and the Red 26kg making it easy to hang up on the wall when not in use leaving plenty of room in your garage. Unlike Heavy Hydraulic table Lifts!

Both Red and Blue lifts are similar in dimensions with the Big Blue being just a few centimetres larger, they both occupy a footprint of around 80 x 64cm and stand around 94cm high. The weight of the lifts excluding the mount set is : Eazyrizer Red @25kg - Big Blue 35 kg. Making it Easy to move around wherever you need it, Hang up on the garage wall or even pop round to your mates house with it! Eazyrizer Lifts Guaranteed for Life!

Both Red and Blue Eazyrizer lifts can be raised to any desired height and the unique screw shaft design locks at any given position, for Total Security provisions are made for a Padlock to be inserted and locking the lift at maximum height to give you Maximum Security for your motorcycle! LIFT IT and LOCK IT!!

The Bikegrab universal Wheel Chock is designed around a 120mm tyre this being the most popular size of all. It is Fully Adjustable to take any size motorcycle tyre from as low as 75mm wide up to 195mm so it will work with both your Front of Rear wheel. For tyre sizes below 120mm it will be necessary to use our reducer kit! It does not matter whether the bike is old or new providing the tyre sizes are within the parameters shown Bikegrab will hold your bike safely upright without ever using your side stand again. Obviously this will also save space in your garage with the bike not leaning over on its side?

Of Course, Bikegrab can be used almost anywhere on either front or rear wheel, it is perfectly suited for use in vans and trailers as the pictures in our gallery show. It provides a safe and secure environment on any type of transport, you can use it freestanding or for maximum security take advantage of our lightning fast Quick Release plate that simply bolts to the vehicle floor and the stand slides in and out being Locked into place by a Single 10mm high tensile bolt. (17mm wrench required) When in use on a road going vehicle it is always necessary to stop down the motorcycle, this will be required by law.

No you do not need it as such, but being Safe and Secure is ALWAYS a GREAT IDEA!

The Bikegrab Reducer kit will only be required when using the stand on the Front wheel when tyre sizes fall below 120mm wide as with Harley Davidson sportster or older Classic motorbikes. The reducer plates are designed to rotate round the tube work so you can lock them into any desired position that suits your bike for maximum stability and when not required just turn them to the vertical position for going back to 120mm tyres.

STRONGARM is designed to work with ALL motorcycles that have a Duplex (twin rail frame) and will work with all models of Harley Davidson including the Baggers! It is fully protected so no harm will come to your bikes paintwork and will even lift with other bikes that have a Flat Engine base like the Victory or Indian bikes, just check that you have a level underside surface from left to right of the bike. Strongarm will even permit safe wheel removal on most models!